The following pages and posts are categorized with
| Title | Type | Excerpt |
|---|---|---|
| Activity Log: Pro-Presenter 6.3.2 Update | Post | Installed latest update from ProPresenter (version 6.3.2) Fixes crash when clearing a message with a timer Fixes timeline playback rate not being remembered Fixes dragging of slides to the timeline Fixes dragging of communication and multiscreen cues to slides Fixes alpha not working for syphon output Fixes issue... |
| Activity Log: QU-32 Network Address | Post | In accordance with the rest of the network setup, the QU-32 has been assigned a static IP address. The gateway value on the Qu-32 was incorrect and has been corrected. |
| Stage Display: A Conundrum is Afoot | Post | Sadly, after extensive troubleshooting with 2 different adapters and various video drivers, adding a 4th display to the iMac was unsuccessful. The vision is to have a stage display feed coming out of the iMac that can essentially be fed to any location in the building, which would include the... |
| Activity Log: Sanctuary Display Update | Post | Display Configuration The J5 Create Display Adapter (USB - HDMI was not working with the native driver, nor the updated driver from their website) Removed the J5 Adapter. Installed the DisplayLink USB Graphics Software for OSX and macOS version 4.1 on the Media iMac. This is the driver... |
| Remote Control of DMX Lighting System | Post | One of the exciting aspects of using Ableton Live in a house of worship is the ability to network two or more computers both running Ableton Live together in a Master/Slave environment, where one computer can: Take-over clock control of the slave computer and trigger the timeline. Remotely control... |
| Future Plans for Content | Post | There are quite literally billions of things that we can do with this site. Here are a few of my ideas that I’ll be rolling forward with to continue to provide great content that helps you get what you need to do done. Screenshots and photos: All of... |
| Documentation Migration Progress | Post | Migration of the site from the GitHub WIKI has been a much more time intensive project than originally planned as there’s a fairly steep learning curve regarding the platform that the site is operating on. But, it’s getting there. Today the majority of the changes included re-writing the code in... |
| Update: iMac Default Output Channels | Post | After service this past Sunday, the Mexico Missions trip meeting moved into the sanctuary due to attendance. As a result, we needed to fire up the sound system again, and setup a quick recording track to capture the meeting. By default, when the iMac is powered up, if there are... |
| Activity Log: Confidence Monitor / Stage Display | Post | Identified that the Stage Display in the back of the Sanctuary had no power due to a tripped breaker (breaker #17) on the Foyer panel. Turned power on. Programmed Harmony Remote Control to be able to access the Vizio stage monitor on the back of the sanctuary wall. Tested,... |
| Update: Renewed Vision Recommended Video Adapter | Post | Renewed Vision recommended that we first try the USB adapter drivers offered at www.DisplayLink.com. If that doesn’t work… We will need to purchase the recommended USB adapter from Renewed Vision. |
| Activity Log: Projector Remote Network Access | Post | Mapped out the Projector network connections and configured remote control. You no longer need to use the IR remotes to turn on the projectors. Created the Projectors page. |
| Activity Log: Wired and Configured Lobby Audio | Post | Wired a new XLR connection from the QU-32 Mix 4 Output to input 5 of the RAVE 522ua DSP. Isolated output 6 on the DSP (Foyer Mix) Mapped out a Wiring Diagram for the Rave 522ua. Anything sent to Mix 4 goes only to the Foyer and Kitchen... |
| Activity Log: Stage Reconfiguration and Audio Routing | Post | Cleaned up the entire stage. Re-routed most cabling to dSnake ports that were closer to the source. Created a new scene on the QU-32 called Re-Routed. Mappings can be found on this page. Unless any other changes are to be made, this scene can be permanently... |
| Activity Log: DMX Lighting Installation | Post | Soldered a female 5-Pin DMX connector to the CAT5 cable that runs from the Leviton Digital DS8 Dimmer to the FOH and subsequently to the DMXIS D-Split and DMXIS USB Controller. Lighting Layout Reference Each dimmer (1 - 7) on the DS8 was... |
| Activity Log: Initial Lighting Survey | Post | Wiring up the house lights to the DMXIS. We still need a female connector for the connection at the DS8 light dimmer control. DMXIS was moved to the right side of the QU32. D-SPLIT installed with power. Connector on sound booth side soldered and connected to... |